View HSD100IFW1-CXX_7307409.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 1/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. to : date : aug, 1, 2008 hannstar product information (preliminary) 10 color tft-lcd module model: hsd100ifw1 -c** note: 1. the information contained herein is tentat ive and may be changed without prior notices 2.please contact hannstar display corp. before designing your product based on this module specification. 3.the information contained herein is presente d merely to indicate the characteristics and performance of our products. no responsibility is a ssumed by hannstar for any intellectual property claims or other problems that may result f rom application based on the module described herein. 4.the mark ** of model means sub-model cod e. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 2/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. record of revisions rev. date sub-model description of change 1.0 aug., 1, 2008 - preliminary product specification was first release d. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 3/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. contents 1.0 general description p.4 2.0 absolute maximum ratings . p.5 3.0 optical characteristics. . p.6 4.0 block diagram p.10 5.0 interface pin connection p.1 1 6.0 electrical characteristics p.1 3 7.0 reliability test items p.21 8.0 outline dimension p.22 9.0 lot mark ... p.23 10.0 package specification p.24 11.0 general precaution p.25 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 4/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 1.0 general description 1.1 introduction hannstar display model hsd100ifw1- c is a color active matrix thin film transistor (tft) liquid crystal display (lcd) that uses amorph ous silicon tft as a switching device. this model is composed of a tft lcd panel, a driving circuit and a back light system. this tft lcd has a 10 (17:10) inch di agonally measured active display area with wsvga (1024 horizontal by 600 ver tical pixel) resolution. 1.2 features 10 (17:10 diagonal) inch configuration 6 bits driver with 1channel ttl interface rohs and halogen-free compliance 1.3 applications portable dvd digital photo frame display terminal for av application 1.4 general information item specification unit outline dimension 235 x 145.8 x 5.5 (typ.) mm display area 220.416(h) x 129.15(v) mm number of pixel 1024 rgb (h) x 600(v) pixels pixel pitch 0.21525(h) x 0.21525(v) mm pixel arrangement rgb vertical stripe display mode normally white surface treatment antiglare, hard-coating (3h) with ewv film weight (235) (typ.) g back-light single led (side-light type) logic system (0.6) (max.) w power consumption b/l system (2.4) (max.) w 1.5 mechanical information item min. typ. max. unit horizontal (h) 234.5 235 235.5 mm vertical (v) 145.3 145.8 146.3 mm module size depth (d) 5.5 5.8 mm weight (235) g free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 5/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 2.0 absolute maximum ratings 2.1 electrical absolute rating 2.1.1 tft lcd module item symbol min. max. unit note digital supply voltage vcc -0.5 5 v analog supply voltage avdd -0.5 13.5 v v1~v7 0.4avdd avdd+0.3 v supply voltage v8~v14 -0.3 0.6avdd v digital input voltage - -0.5 vcc+0.5 v 2.1.2 back-light unit item symbol typ. max. unit note led current i l 200 ma (1) (2) (3) led voltage v l 10.5 v (1) (2)(3) note (1) permanent damage may occur to the lcd modu le if beyond this specification. functional operation should be restricted to th e conditions described under normal operating conditions. (2) ta =252 (3) test condition: led current 200 ma. the led lifetime could be decreased if operating i l is larger than 200ma. 2.2 environment absolute rating item symbol min. max. unit note operating temperature t opa 0 50 storage temperature t stg -20 60 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 6/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 3.0 optical characteristics 3.1 optical specification item symbol condition min. typ. max. unit note contrast cr 400 500 (1)(2) rising t r 5 7 response time falling t f 20 28 msec (1)(3) white luminance (center) y l 200 250 cd/m 2 (1)(4) (i l =200ma) w x 0.260 0.310 0.360 color chromaticity (cie1931) white w y =0 normal viewing angle 0.280 0.330 0.380 l 60 70 hor. r 60 70 u 40 50 viewing angle ver. d cr>10 50 60 (1)(4) brightness uniformity b uni =0 70 % (5) optima view direction 6 o clock (6) 3.2 measuring condition measuring surrounding dark room led current i l 200ma ambient temperature 252 o c 15min. warm-up time. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 7/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 3.3 measuring equipment fpm520 of westar display technologies, inc., which utilized sr-3 for chromaticity and bm-5a for other optical characteristics. measuring spot size 20 ~ 21 mm note (1) definition of viewing angle: note (2) definition of contrast ratio (cr) : measured at the center point of panel luminance with all pixels white cr = luminance with all pixels black l r u d =0 o =180 o 12 oclock =90 o 6 oclock =270 o free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 8/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (3) definition of response time : sum of t r and t f note (4) definition of optical measurement setup time optical response white(tft off) black (tft on) white(tft off) 100% 90% 10% 0% t r t f free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 9/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (5) definition of brightness uniformity 16.67% 50.00% 83.33% 16.67% 50.00% 83.33% y2 y3 y4 y9 y1 y5 y8 y7 y6 luminance uniformity = 100% note (6) rubbing direction (the different rubbing direction will cause the different optima view direction. (min luminance of 9 points) (max luminance of 9 points) free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 10/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 4.0 block diagram 4.1 tft lcd module: 4.2 pixel format 1,1 1,1024 600, 1024 lcd display area 2,1 1,2 1,3 1,4 600 lines 1024 pixel (3072 dots) 600,1 r r r b g 1 pixel g/d s/d s/d s/d x-pcb cn1 cn2 led 1024(rgb)x600 cn3 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 11/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 5.0 interface pin connection 5.1 tft lcd module cn1 (input signal): 30pin, 0.5mm pitch, 196033-30041-3 (p-two or equivalent) pin no. signal description 1 pol polarity setting 2 stvd vertical line start pulse i/o signal 3 oe123r vertical line output enable signal 4 g-clkr vertical line clock 5 stvu vertical line s tart pulse i/o signal 6 gnd digital power ground 7 edgsel define clock edge select input, default edgsel=l. edgsel=l latch data by rising edge of clock edgsel=h latch data by rising and falling edges of clock 8 vcc digital voltage input 9 v9 gamma voltage input 10 vgl gate off voltage 11 v2 gamma voltage input 12 vgh gate on voltage 13 v6 gamma voltage input 14 udc shift up/down control signal udc = "h", up shift: stvd (input) g1 ~ g600 stvu (output) udc= "l", down shift: stvu (input) g600~g1 stvd (output) 15 vcom common voltage 16 agnd analog power ground 17 avdd analog voltage input 18 v14 gamma voltage input 19 v11 gamma voltage input 20 v8 gamma voltage input 21 v5 gamma voltage input 22 v3 gamma voltage input 23 gnd digital power ground 24 r5 red data bus input (msb) 25 r4 red data bus input 26 r3 red data bus input 27 r2 red data bus input 28 r1 red data bus input 29 r0 red data bus input (lsb) 30 gnd digital power ground free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 12/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. cn2 (input signal): 30pin, 0.5mm pitch,196033-30041-3 (p-two or equivalent) pin no. signal description 1 gnd digital power ground 2 g5 green data bus input (msb) 3 g4 green data bus input 4 g3 green data bus input 5 g2 green data bus input 6 g1 green data bus input 7 g0 green data bus input (lsb) 8 dio2_cof3 horizontal line start pulse i/o signal (sthr) 9 rev data invert signal 10 gnd digital power ground 11 clk pixel clock 12 vcc digital voltage input 13 dio1_cof1 horizontal line start pulse i/o signal (sthl) 14 ld polarity latch and re-flash new data to outpu t 15 b5 blue data bus input (msb) 16 b4 blue data bus input 17 b3 blue data bus input 18 b2 blue data bus input 19 b1 blue data bus input 20 b0 blue data bus input (lsb) 21 lrc select left or right shift, normally pulled high. shl=1: dio1 out1,2,3 out4,5,6 out1198,1199,1200 = dio2 shl=0: dio1= out1,2,3 ? out4,5,6 ? out1198,1199,1200 ? dio2 22 v1 gamma voltage input 23 v4 gamma voltage input 24 v7 gamma voltage input 25 v10 gamma voltage input 26 v12 gamma voltage input 27 v13 gamma voltage input 28 avdd analog voltage input 29 agnd analog power ground 30 vcom common voltage 5.2 back-light unit cn3 led power source ( bhsr-02vs-1 ) or equivalent mating connector: ( sbht-002t-p0.5 ) or equivalent terminal no. symbol function 1 v l led power supply (high voltage) 2 g l led power supply (low voltage) free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 13/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.0 electrical characteristics 6.1 tft lcd module item symbol min. typ. max. unit note vcc 3.0 3.3 3.6 v note (2), note (3) v gh 14.55 15 15.45 v note (2), note (3) v gl -7.35 -7 -6.65 v note (2), note (3) supply voltage av dd 9.22 9.48 9.75 v note (2), note (3) vcom v comin - 3.41 - v v ih 0.7 vcc - vcc v note (1) input signal voltage v il 0 - 0.3 vcc v i cc - 5 - ma vcc = 3.3v i add - 60 - ma av dd = 9.5 v (black) i gh - 0.3 - ma v gh = 15 v current of power supply i gl - 0.6 - ma v gl = -7 v input level of v1~v5 vx avdd/2 - avdd-0.1 v input level of v6~v10 vx 0.1 - avdd/2 v note (1): hsync, vsync, de, digital data note (2): be sure to apply the power voltage as the power sequence spec. note (3): dgnd=agnd=0v free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 14/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.2 back-light unit the back-light system is an edge-lighting type with 30 led. the characteristics of the led are shown in the fol lowing tables. item symbol min. typ. max. unit note led current i l 200 ma (2) led voltage v l 10.5 v operating led life time hr 20000 hour (1) (2) note (1) led life time (hr) can be defined as the t ime in which it continues to operate under the condition: ta=253 o c, typical il value indicated in the above table until the brightness becomes less t han 50%. note (2) the led life time is defined as the module bright ness decrease to 50% original brightness at ta=25 and il=200ma. the led lifetime could be decreased if operating il is larger than 2 00ma. the constant current driving method is suggested. led light bar circuit lcd module white ( ground) black a power supply 1 2 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 15/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. note (3) suggested schematic of led back-light driv er suggested schematic of led back-light driver free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 16/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.3 ac characteristics source driver timing item symbol min. typ. max. unit note clk frequency fclk - 55 70 mhz - clk pulse width tcw 6 - - ns - data set-up time tsu 4 - - ns - data hold time thd 2 - - ns - propagation delay of dio2/1 tphl 6 10 15 ns cl=25pf ( output ) time that the last data to ld tld 1 - - tcph - pulse width of ld twld 2 - - tcph - time that ld to dio1/2 tlds 5 - - tcph - pol set-up time tpsu 6 - - ns pol to ld pol hold time tphd 6 ns pol to ld gate driver timing item symbol min. typ. max. unit note cpv period tcpv 5 - - us - cpv pulse width tcpvh, tcpvl 2.5 - - us 50% duty cycle oe pulse width twoe 1 - - us - data setup time tsu 0.7 - - us - data hold time thd 0.7 - - us - free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 17/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.4 timing diagram of interface signal source driver timing tphl tphl 70% 30% dio1/2 (output) data,rev clk 70% tcw tcw tsu first data second data last data dio1/2 (input) 70% 70% thd tsu tcph 70% 30% 30% 70% 70% 70% thd 70% 70% ld pol tpsu tphd 70% 70% 70% ld 70% clk dio1/2 (input) 70% tld 70% 70% twld tlds free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 18/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. gate driver timing cpv stvu tcpv tcph tcpl tsu thd oe twoe 50% 50% 50% free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 19/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.5 power on / off sequence item min. typ. max. unit remark tp1 0.5 -- 10 msec tp2 0 -- 50 msec tp3 0 -- 50 msec tp4 500 -- -- msec tp5 200 -- -- msec tp6 200 -- -- msec power on sequence: vcc-> avdd -> vgl -> vgh -> data -> b/l power off sequence: b/l-> data -> vgh -> vgl -> avd d -> vcc notes: data include r0~r7, g0~g7, b0~b7, hsd, vsd, dclk, shlr, updn , de mode, rstb, stbyb, shlr, updn, dith t 10% 90% level define power supply signal backlight (recommended ) 0v 0v power on power off 0.9v dd 0.1v dd 0.9v dd 0.1v dd 0.1v dd 0.6v 0.6v 50% 50% tp1 tp2 tp3 tp4 tp5 tp6 free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 20/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 6.6 gamma circuit v8 v9 v10 v11 v12 v13 v14 v8 v9 v10 v11 v12 v13 v14 61.9(0603,1%) 21(0603,1%) 66.5(0603,1%) 38.3(0603,1%) 40.2(0603,1%) 95.3(0603,1%) 32.4(0603,1%) 13.7(0603,1%) v2 v3 v4 v5 v6 v7 v1 v1 v2 v3 v4 v5 v6 v7 avdd 34.8(0603,1%) 90.9(0603,1%) 30.1(0603,1%) 21.5(0603,1%) 42.2(0603,1%) 53.6(0603,1%) 12.4(0603,1%) avdd v7 v7 *suggested gamma circuit. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 21/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 7.0 reliability test items no. item conditions remark 1 high temperature storage ta= +60 o c , 240hrs 2 low temperature storage ta= -20 o c , 240hrs 3 high temperature operation ta= +50 o c, 500hrs 4 low temperature operation ta= 0 o c, 500hrs 5 high temperature and high humidity (operation) ta= +50 o c, 80%rh, 500hrs 6 thermal cycling test (non operation) -20 o c (30min) +60 o c (30min), 100 cycles 7 electrostatic discharge 200v,200pf(0 ) 1 time/connector 8 vibration 1.random: 1.04g, 10~500hz, xyz, 30min/each direction 2.sine: 1.5g, 5~500hz, xyz 30min/each direction 9 shock half-sine, 220g, 2ms, xyz, 1time 10 vibration (with carton) random: 1.04g, 10~500hz, xyz, 45min/each direction 11 drop (with carton) height 60 cm 1 corner, 3 edges, 6 surfaces jis z0202 note: there is no display function ng issue occurr ed, all the cosmetic specification is judged before the reliability stress. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 22/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 8.0 outline dimension 8.1 outline dimension u u nit : mm free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 23/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 9.0 lot mark 9.1 lot mark 10 11 12 13 14 15 code 1,2,3,4,5,6: hannstar internal flow control co de. code 7: production location. code 8: production year. code 9: production month. code 10,11,12,13,14,15: serial number. note (1) production year year 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 mark 9 0 1 2 3 4 5 6 7 8 note (2) production month month jan. feb. mar. apr. may. jun. jul. aug. sep. oct nov. dec. mark 1 2 3 4 5 6 7 8 9 a b c 9.2 location of lot mark (1) the label is attached to the backside of the lc d module. (2) this is subject to change without prior notice. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 24/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 10.0 package specification 10.1 packing form (1) package quantity in one carton: 30 pieces. (2) carton size: 460 5 mm 361 5 mm 321 5 mm. 10.2 packing assembly drawings free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 25/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.0 general precaution 11.1 use restriction this product is not authorized for use in life supp orting systems, aircraft navigation control systems, military systems and any other applicatio n where performance failure could be life-threatening or otherwise catastrophic. 11.2 disassembling or modification do not disassemble or modify the module. it may da mage sensitive parts inside lcd module, and may cause scratches or dust on the dis play. hannstar does not warrant the module, if customers disassemble or modify the mod ule. 11.3 breakage of lcd panel 11.3.1.if lcd panel is broken and liquid crystal sp ills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with ski n. 11.3.2. if liquid crystal contacts mouth or eyes, r inse out with water immediately. 11.3.3. if liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 11.3.4. handle carefully with chips of glass that m ay cause injury, when the glass is broken. 11.4 electric shock 11.4.1. disconnect power supply before handling lcd module. 11.4.2. do not pull or fold the led cable. 11.4.3. do not touch the parts inside lcd modules a nd the fluorescent leds connector or cables in order to prevent electric shock. 11.5 absolute maximum ratings and power protection circuit 11.5.1. do not exceed the absolute maximum rating v alues, such as the supply voltage variation, input voltage variation, variation in pa rts parameters, environmental temperature, etc., otherwise lcd module may be dama ged. 11.5.2. please do not leave lcd module in the envir onment of high humidity and high temperature for a long time. 11.5.3. its recommended to employ protection circu it for power supply. 11.6 operation 11.6.1 do not touch, push or rub the polarizer with anything harder than hb pencil lead. 11.6.2 use fingerstalls of soft gloves in order to keep clean display quality, when persons handle the lcd module for incoming inspection or as sembly. 11.6.3 when the surface is dusty, please wipe gentl y with absorbent cotton or other soft material. free datasheet http:///
h a n n sta r di sp l a y c o rp . document title hsd100ifw1-c product information pag e no. 26/26 document no. revision 1.0 the information contained in this document is the e xclusive property of hannstar display corporation. it shall not be disclosed, distributed or reproduced in whole or in part without written permission of hannstar displa y corporation. 11.6.4 wipe off saliva or water drops as soon as po ssible. if saliva or water drops contact with polarizer for a long time, they may ca uses deformation or color fading. 11.6.5 when cleaning the adhesives, please use abso rbent cotton wetted with a little petroleum benzine or other adequate solvent. 11.7 mechanism please mount lcd module by using mounting holes arr anged in four corners tightly. 11.8 static electricity 11.8.1 protection film must remove very slowly from the surface of lcd module to prevent from electrostatic occurrence. 11.8.2 because lcd module use cmos-ic on circuit bo ard and tft-lcd panel, it is very weak to electrostatic discharge. please be car eful with electrostatic discharge. persons who handle the module should be grounded through adequate methods. 11.9 strong light exposure the module shall not be exposed under strong light such as direct sunlight. otherwise, display characteristics may be changed. 11.10 disposal when disposing lcd module, obey the local environm ental regulations. free datasheet http:///

▲Up To Search▲

Price & Availability of HSD100IFW1-CXX

	To Download HSD100IFW1-CXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .